Operation Manual

80
Connecting the receiver
Connect an antenna to both tuners
(Loop-trough)
You can use both tuners via one antenna with one output. Please
proceed as follows:
Ö Insert the plug of the antenna cable into the antenna connection
„ANT IN“ of tuner A on the receiver.
Ö Connect the antenna bridging cable to the "ANT OUT" connec-
tion of tuner A. Then connect the bridging cable to the "ANT IN"
connection of tuner B.
CL_BDA_DVB_T704_GB_ka1.qxd 26.01.2006 10:48 Uhr Seite 80