Operation Manual

79
Connecting the receiver
Connecting an active room antenna
To use the receiver with an active room antenna, you must first
activate the voltage at the antenna output (see Page 77). In this
case, the active room antenna draws the necessary current from
the receiver's antenna connection.
Ö Connect the antenna cable's connector to the "ANT IN" (Tuner A
or B) antenna connection on the receiver.
Attention!
Note the specifications in the operating instructions for your
active room antenna under all circumstances. Otherwise the
receiver could become damaged.
CL_BDA_DVB_T704_GB_ka1.qxd 26.01.2006 10:48 Uhr Seite 79