Operation Manual

77
Connecting the receiver
Connecting the receiver
Connecting the antenna
The receiver is connected to the antenna via an antenna cable. The
receiver may be connected via the home antenna or via a passive
or active room antenna without a power supply.
When connecting a room antenna, make the following
settings after properly installing the receiver.
(Commissioning: see pp. 88 ff.)
Activating or deactivating voltage at the antenna output
Ö Press the "MENU" key.
Ö Use the arrow keys "CH ▼" and "CH ▲" to call up the
"Installation" menu.
Ö Press the "OK" key.
A new window is opened.
Ö Use the arrow keys "CH ▼" and "CH ▲" to call up the "System
Setting" option.
Ö Press the "OK" key.
Attention!
Before connecting, remove all films from the receiver and the
remote control. Otherwise, the receiver may be damaged or the
remote control may fail to function properly.
Attention!
Only connect the receiver to the mains power supply once you
have properly connected it to all devices and the antenna.
CL_BDA_DVB_T704_GB_ka1.qxd 26.01.2006 10:48 Uhr Seite 77