Operation Manual

Rectifying malfunctions
114
Rectifying malfunctions
Symptom Possible cause and remedy
The view in the display The power cable is not connected.
does not light up. Connect the power cable to the mains socket.
The mains switch is not switched on.
Switch the mains switch on.
No sound and picture, The receiver is in standby mode
the LED on he receiver Press the "Power" key. The receiver switches on and the
tlights up. channel is shown on the TV screen.
No sound or picture. No signal or a weak signal only.
Check the cable connection to the receiver and from the
receiver to the connected devices.
Align the antenna.
The TV set does The system is not connected correctly.
not show a picture. Check the SCART or HF cable's connection.
The TV set is not in AV mode.
Switch the TV set to the relevant AV input.
Poor picture, The antenna is not aligned correctly.
locking error Align the antenna.
The remote control The batteries are spent.
does not function. Replace the batteries with new ones.
The remote control is not being pointed properly.
Point the remote control at the front of the receiver and
make sure that nothing is positioned between the remote
control and the receiver.
The menu cannot be The device is in "Tuner B" operation.
called up. Change to tuner A by pressing the "A/B" button.
If a malfunction still cannot be rectified, please contact your specialist
dealer or the manufacturer.
CL_BDA_DVB_T704_GB_ka1.qxd 26.01.2006 10:48 Uhr Seite 114