Operation Manual

Carrying out basic settings
30
Searching for and editing stations
Select the "Channel Search" sub-menu to quickly search for a station
or change the characteristics of stored stations.
The individual settings for a station can be carried out in this menu.
 Select the desired option with the "CH T" and "CH S" arrow
keys.
 Change the setting with the "VOL X" and "VOL W" arrow keys.
L
The following settings are already pre-set in the case of the
automatic station search (see "Searching for stations",
Page 31). Change these settings only if you know the
precise values.
The following settings are available:
Frequency KHz
 Specify the precise frequency of the station.
Bandwidth
 Select the desired bandwidth.
Mode
 Set the carrier signal here.
Guard Interval
 Set the interval for frequency modulation here.
FEC Rate
 Set the error code here.
Modulation
 Set modulation here.