Operation Manual

27
Carrying out basic settings
Navigating in menus and sub-menus
 To switch between the menu options, press the "CH T" and
"CH S" arrow keys on the remote control.
L
Note the explanations at the bottom edge of the screen.
The selected menu option is marked by being shown as green,
flashing text. If you have selected an option in a sub-menu, your
selection has a yellow background.
 To confirm the selected menu option, press the "OK" key.
The settings for this menu option are displayed.
 To move from one setting to the next, press the "CH T" and
"CH S" arrow keys.
The selected setting is marked.
 You may:
- switch between the options with the "VOL X" or "VOL W"
arrow keys
- use the numerical keys to enter numbers if the setting requires
a numerical input.
 If you wish to access the next highest menu level, press the
"EXIT" key.
 To leave the main menu, press the "EXIT" key again.
The on-screen menu is closed and the screen is switched to TV or
radio mode.
The system settings must be adjusted to enable you to use the
receiver's full range of functions (see the following Chapter).
 Press the "MENU" key on the remote control.