Operation Manual

Commissioning

 Insert the receiver's mains plug into the mains socket.

The device is set to standby mode.

 Insert the connected devices' mains plug into the mains socket

and switch these on.

 Switch on the AV channel on the TV set.

Please refer to your TV set's operating instructions for

information on how to switch the "AV" channel on.

Activate channel search when commissioning for the first time (see

Page 30).

Remote control

The remote control requires two Micro LR 03/AAA 1.5 V batteries.

 Open the battery compartment.

 Insert two batteries into the battery compartment, observing the

specified polarity.

 Carefully close the battery compartment lid again until the lid

engages.

 Replace dying batteries within good time.

 Always replace both batteries at the same time and use batteries

of the same type.

 If a battery has leaked, put on protective gloves and clean the

battery compartment with a dry cloth.