Operation Manual

Safety instructions

Read through the safety instructions carefully before commissioning

the receiver.

Observe all warnings and notes on the device and in the operating

instructions.

Basic safety instructions

Electrical connection

• To avoid the danger of fire and the risk of electric shock, do not

expose the receiver to rain or other types of moisture.

• Never open the housing. This otherwise leads to a risk of electric

shock.

• Only connect the receiver to a properly installed 100–240 V,

50–60 Hz mains socket.

• Total current consumption at the receiver's "ANT IN" antenna

connection must not exceed 75 mA.

• Disconnect the mains plug from the socket if the device is not

used for a long period of time. Pull on the mains plug only.

• If foreign bodies or fluid enter the receiver, immediately

disconnect the mains plug from the socket. Have the device

checked by qualified, specialist personnel before re-

commissioning it. This otherwise leads to a risk of electric shock.

• Do not kink or crush the mains power cable.

• Do not touch the mains power cable with moist hands. This

otherwise leads to a risk of electric shock.

• If the mains power cable is damaged, the receiver must be

repaired by specialist personnel before it can be used again. This

otherwise leads to a risk of electric shock.

• Never allow children to use the receiver without supervision or to

play with the antenna system.

• Always have maintenance work carried out by qualified, specialist

personnel. You otherwise place yourself and others in danger.