User manual

50
GB
Nose and ear hair trimmer
Special instructions for this appliance
WARNING: RISK OF INJURIES!
• Do not use the appliance if the shaving head, blade holder or blade are deformed or
damaged!
• Do not remove the shaving head during operation!
• Do not introduce the appliance further into the nostril / auricle than to the narrow tip of
the shaving head.
CAUTION:
• The shaving head and blade are precision-machined and must not to be exposed to
heavy loading, impacts or similar.
• Do not put any sharp objects into the shaving head.
• Protect the appliance from moisture or liquids.
• This appliance is only meant for removing nose and ear hair. Do not use the appliance
for any other purposes.
• Switch off the appliance before cleaning and removing the batteries.
Scope of delivery (without g.)
1 Nose and ear hair trimmer
1 Protective cap for the shaving head
Inserting of the battery
(Battery is not included in the scope of delivery)
1. Turn the bottom cover and pull it off.
2. Insert a 1.5 V battery of the type MIGNON AA into the battery com-
partment. The positive pole (+) has to show towards the shaving
head.
3. Close the battery compartment again: Turn the cover onto the
device until it engages with a click. The attened part of the cover
must be positioned exactly under the attened part of the device
(see Fig.).