User manual

Radio Operation Fw 190 A-4
The Fw 190 A-4 used the improved FuG 16 radio giving the pilot the option to choose from
four pre-tuned radio frequencies and to fine-tune the radio within a limited range.
Our FS model translates this into the following functionality:
– COM 1 and COM 2 with standby frequencies.
– Receive on both radios.
The avionics main switch is located in the right consol's rear electrical panel.
First let's have a look at the switches (Figure 1):
Switch #1 Toggles COM 1 and COM 2 forth and back.
Switch #2 swaps the active Radio's standby frequency.
Switch #3 toggles whether you want to receive on both COM radios or on the active Radio
only.
Fig. 1
29