Instruction manual

Figure 7
SECTION 4: OPERATION
TO ACCESS CONTROL PANEL- Open the front glass doors, then slide the mesh curtains to the sides. Lift the
hinged door that covers the control panel (figure 5).
E-7
CONTROL PANEL FUNCTIONS
- MAIN POWER
The MAIN POWER button supplies power to all of
the functions of the fireplace. This button must be
in the ON position for any of the functions to work
including the remote.
FLAME
The HEATER button will turn on/off the heater
output and regulate your room temperature.
There are six levels you can cycle through including
off setting.
HEAT
The FLAME button adjusts the flame brightness.
Each time the flame button is pressed, the intensity
of the flame decreases. There are six brightness levels
you can cycle through including the off setting.
Figure 5
Figure 6
CONTROL PANEL
LIFT
Model #
23EF024GRA
Model #
28EF024GRS
33EF024GRS
HEAT FLAME EFFECTS
HEAT FLAME LIGHTS EFFECTS
DOWNLIGHT
(Models: 28EF024GRS & 33EF024GRS only)
The DOWNLIGHT button provides power to the
downlight that illuminates the top of the logs and
the inside of the firebox.
EFFECT
The EFFECT button will turn on the rolling effect of
flame, emberbed, logs and downlight in random way.
Meanwhile, can hear crackle and wind, can see the
sparks on the logs.
NorthlineExpress.com
http://www.northlineexpress.com
Toll-Free 1-866-667-8454