User's Manual

6. You can also connect one end of the supplied audio cord to the rear of
the transmitter, and connect the other end to the output jack of any of
your desired audio sources, like MP3, CD, DVD, TV, Radio recorder,
etc.
7. When an audio signal reaches the transmitter, the green SIGNAL
indicator illuminates together with the blue POWER indicator. If the
green SIGNAL indicator does not illuminate, ensure the audio source is
switched on.
Speaker
Battery Operation
1. To operate the speaker using battery power, open the battery
compartment cover located at the rear of the speaker.
2. Insert six AA size batteries (purchase separately) into the battery
compartment, observing proper +/- polarities as indicated.
3. Replace the battery compartment cover.
AC Operation
1. To operate the speaker using AC power, plug the 9V power adapter into
a standard wall outlet.
2. To insert the power adapter connector plugs firmly into the DC IN jacks
located underneath the speaker.
Speaker Operation
1. To switch on the speaker, press the POWER button located on the front
panel of the speaker. A blue power LED on the speaker illuminates.
2. To listen to a desired audio source through the speaker, switch on the
audio device that the transmitter base is connected to. The blue LED on
the transmitter illuminates.
3. Depending on location, select CHANNEL 1 or 2 on the transmitter base
for optimal performance.
4. For optimal reception, ensure the transmitter and speaker receiver are
approximately 21 feet apart.