User's Manual

Transmitter Operation
1. Plug the included AC adapter into a standard wall outlet.
2. A blue POWER indicator illuminates when the AC adapter is plugged in.
If the blue POWER indicator does not illuminate, ensure the adapter is
plugged in.
3. Insert the adapter connector plug firmly into the DC jack located at the
back of the transmitter.
4. Open the cover on the top of the transmitter, you can pull out a 3.5mm
audio cable which you can connect it to the i-pod’s output jack. After
used, just pull it for a bit and release, then it will roll back automatically.
5. The rubber surface of the transmitter is specially designed for you to lay
your I-pod on it to prevent sliding down.
Auto Tune Volume +/- Bass Boost Power On/Off
Button Buttons Button Button