User's Manual

P. 3
INSTALLATION
TRANSMITTER
1. Connect the supplied AC/DC power adapter to an electrical wall outlet.
2. Plug the AC/DC power adapter in the DC jack located on the rear of the
transmitter.
3. The rear of the transmitter has one audio cord that can be connected to audio
output jack of TV, VCR, Hi-Fi, CD/MP3/VCD/DVD players or to
headphone/earphone jack with the connector provided.
Plug the adapter in the AC source and connect the audio plug to the audio source.
The transmitter will automatically switch on and the red LED will light up when it
receives an audio signal.
HEADPHONE RECEIVER
1. To install or replace the rechargeable batteries, carefully remove the leather
padding around the left and right earphone plates out from the cabinets.
2. Insert 2pcs of AAA size rechargeable batteries (supplied in the package) into
the right earphone’s battery compartment and 1pc of AAA size rechargeable
battery (supplied in the package) into the left earphone’s battery compartment.
Make sure the batteries are placed at the right polarity.
3. Cover the leather padding back after inserted the
batteries.