` HP990 2.
INTRODUCTION This 2.4GHz Digital Wireless Headphone uses latest digital wireless technology that enables you to enjoy music and TV sound anywhere inside your home. Simply connect the transmitter to a desired audio source: DVD player, CD player, TV set, VCR or Hi-Fi system. Without complicated wiring and installation with your Audio/Video equipments and rear channel amplifier, the system enables you to enjoy thrilling, lifelike sound in minutes. FEATURES 1. Purely 2.4GHz Digital UHF Technology. 2.
COMPONENT PART LIST A) TRANSMITTER 1. Power / Signal indicator. 2. Charging indicator. 3. Charging pins. 4. Audio IN socket. 5. DC IN socket. B) HEADPHONE RECEIVER 6. Volume Up Control. 7. Volume Down Control. 8. Volume & Signal LED indicator. 9. Battery compartments. 10. Charging contacts. 11. ON/OFF Control. 12. Power LED indicator. C. ACCESSORIES 13. RCA cable. 14. NiMh batteries for Headphone (3 pieces). 15. 3.5mm to 6.3mm adapter plug. 16. AC/DC adapter ( 1x 6V 300mA for transmitter). P.
INSTALLATION TRANSMITTER 1. Connect the supplied AC/DC power adapter to an electrical wall outlet. 2. Plug the AC/DC power adapter in the DC jack located on the rear of the transmitter. 3. The rear of the transmitter has one audio cord that can be connected to audio output jack of TV, VCR, Hi-Fi, CD/MP3/VCD/DVD players or to headphone/earphone jack with the connector provided. Plug the adapter in the AC source and connect the audio plug to the audio source.
OPERATION Transmitter 1. Turn on the audio source (TV or audio component) to which the transmitter is connected with. The Signal / Power LED (Red) on the transmitter will light up when it receives the audio signal. Headphone 1. Turn on the headphone by pressing the Power button. The POWER LED (Red) will light up, the green LED will be flashing until signal link between transmitter and receiver is established. 2. Gently place the headphone on your head and adjust for comfort.
4. Charging the batteries a) Turn OFF the headphone first. b) Place the headphone on the transmitter charging cradle. The charging process begins automatically, and the green LED will light up when the charging contacts of transmitter and headphone are made successfully. When the charging process is completed, the green LED will turn off. c) With the smart speedy charging function, the headphone could be fully charged within 4-5 hours.
Important: 1. Switching Off a) For protection of the transmitter and power saving, the transmitter will switches off automatically if there is no audio source signal for 3 minutes. If the audio source signal returns, the transmitter will automatically switches back on. Then, power on the headphone again. b) The headphone will switch off automatically if there is no signal from the transmitter for 2 minutes. 2. Make sure the headphone is turned off when charging is in process. 3.
TECHNICAL SPECIFICATIONS Transmission Mode : UHF stereo Carrier Frequency : 2.4GHz Digital Operation Voltage : Transmitter, DC 9V 400mA Headphone, 3 x AAA size Rechargeable NiMh batteries (included) Frequency Response : 30Hz – 24KHz Distortion : 0.4% S/N Ratio : 80dB Operation Distance : Up to 200 feet WARNING : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
