Specification

7
A100R1
1
Mount the brackets (DD) centered in the opening vertically. The ange should lie at against the
wall. Use screws (AA) to secure the bracket to the framing.
Depending on framing materials used, the installer may choose to use screws other than what is
supplied with this kit.
NOTE: If wall has a rough surface, such as stone, the
ange should rest against stone surface in vertical
position as shown.
Flange
DD
AA
[x2]
[x10]
Screws B : 4*15mm 10pcs.
Screws A: 4*8mm 8pcs.
Brackets: Metal 343*101.5*35.4mm, 2 pcs.
Securing plates: Metal 80*21.5*7mm, 4 pcs.