FAQ

How long do I wait in between coats?
30 mins or so. It depends on the temperature.
-As long as the surface is dry, you can apply the next coat.
After staining, when can I seal?
-Approximately 1 hour after staining.
-As long as the stain is dry, you can apply sealer
Does each gallon’s coverage include 2 coats or 1?
-Each gallon’s coverage includes 2 coats
Can I use the densifier/ penetrating sealer over a stain?
-No. Penetrating sealers cannot go over stains.
-Must be used alone
Can I dilute the stain to get more coverage or to make the color lighter?
-No. We recommend lighter applications because color can always be built up.
Can I mix 2 different colors together? Same colors?
-No, never mix stains together.
-You can absolutely spray 2 colors, as long as they are dry in between applications
-If you have 2 of the same colors, we always suggest you mix both gallons together for even
pigmentation.
What does the Classic Organic Concrete Cleaner do?
-Removes grease, oil, calcium, and efflorescence from the surface
-Opens up the pores of the concrete to accept the stain
-Can do it 3-4 times to make your concrete look sandblasted
Why do I have to clean my concrete with Classic Organic Concrete Cleaner? Can I just
pressure wash it with water?
-90% of the job is cleaning! You must clean with Classic Organic Concrete Cleaner. It works
as a system with our stains.
-It is worth it to prepare the surface properly so no issues come up later after you've
stained and sealed.
We just poured brand new concrete, when can I start staining?
-Concrete needs at least 28 days to fully cure
I have brand new concrete, so I don't need to clean with the Organic Concrete
Cleaner, right?
-No. Even brand new concrete needs to be cleaned!