Installation manual

Illustrations NOT shown actual size

Two 1/4 - #20 x 5/8" Bolts

Four #10 - 16 x 3/4" Tek Screws

Four #10 - 10 x 5/8" Phillips Screws

Evaporator Support Bracket

Fresh Air Inlet Block Off

Defrost/Heat Duct Assembly

One 1/2" WasherOne J-Clip

One Male Spade Connector

THESE ARE THE PARTS YOU WILL FIND IN BAG KIT B

You will use all of these parts and hardware during the next series of installation steps.