Installation manual
24
Bag Kit E. Locate defrost duct from the heater box to base of the defrost
distribution plenum. Use sharp box knife and carefully trim duct assembly flush
with flange as shown below.
Attach the included defrost adaptor to the duct assembly. Pre-installed S-Clips
will hold it in place.
Attach flex hoses to the adapter and route to the assembly on the top of the
evaporator (see figure 29).
The face/floor assembly comes pre-installed with s-clips which allow you to
install it onto the evaporator unit quickly and securely (see figure 30).
FIGURE 30
FIGURE 29
WWWCLASSICAUTOAIRCOMs866.435.7801
CAA 2028 Installation.indd 24CAA 2028 Installation.indd 24 4/2/12 9:57 AM4/2/12 9:57 AM