Owner`s manual

3 One speaker or subwoofer seems not to be playing.

P If the problem occurs with all inputs, check the interconnecting

cables between the preamp and the power amp. Also check the

speaker wires for secure connections.

PCheckthebalancecontrolsettingbypressingMENUonthe

front panel, and then verify the balance control setting is not

turningonechanneloorreducingit’soutput.

P If the problem occurs for a subwoofer, make sure it is active on

the conguration assigned to this source button.

P Check the interconnect cables between the source component

and the CP-800.

4 The IR remote control does not seem to function.

P Ensure that there are no obstacles between the IR remote and the

IR sensor, located to the right of the Mute button.

P Replace the batteries in the remote control.

5 There is a hum coming out of the speakers.

P If you are using single-ended interconnects, make sure they are

not placed alongside any AC power cords. Also make sure that

they are not too long – long single-ended interconnecting cables

have a natural tendency to pick up noise even when shielded.

PIfanysourcecomponentsareconnectedtocableTV,try

disconnecting the cable television line from the source

component. If the hum goes away, you need an isolation device

betweenyourcableTVconverterandthesourcecomponent.

Your Classé dealer can help you obtain one of these inexpensive

devices.