Owner`s manual

39
PlayLink is automatically active after a software update, and the PlayLink icon
willonlyappearontheCAN-BuscongurationscreenofaDeltaseriesdisc
player.
PlayLink can only select a single source per preamp/SSP per disc
player. It is therefore not designed for users who regularly play both
CDs and DVDs through dierent source buttons from a single disc
player. When PlayLink is active the disc player will default to the
same input every time play is pressed, regardless of whether it is
playing CD or DVD.
amp info Available for ampliers only, this screen displays the data provided by the
heatsink and AC Module temperature sensors.
NOTE: is feature is only accessible when the target amplier is on.
event log Reserved for ampliers, this feature is a protection circuitry event log which can
only be accessed when the target amplier is in standby. e protection circuit
shuts down the amplier or channel if it overheats or if its output could damage
your speakers. e event log details the circumstances surrounding the amp
going into protection and should be referred to in situations that require the
intervention of your dealer or Classé customer support.
e log can report the following events interpreted as follows:
• +ve slow blo trip & -ve slow blo trip — e average current has reached
the safe operating limit.
• +ve fast blo trip & -ve fast blo trip — e peak current has reached the
safe operating limit.
• over temperature trip — e unit temperature has reached the safe
operating limit.
• DC protection trip — e DC output level has reached the safe operating limit.
• Communication failure — ere has been a loss of communication
betweentheamp’ssystemmonitoringsensors.
• AC line trip —epowersupplyhasreachedthelimitsoftheamp’ssafe
operating range.
ese events are rare and generally occur due to issues that are external to the
amp.eyshouldbeinterpretedpositively.eampisdoingwhatit’sdesigned
to do.