Owner`s manual

38
CAN-Bus shared features efollowingCAN-Busfeaturesaresharedbyallmodels.
configuration Selecting conguration will present the CAN-Bus conguration screen
allowing access to name, global brightness, and global standby features..
• name enables you to set the name that this component will be listed under
intheCAN-Busdevicesscreen.enamewillappearnexttotheunit
model and serial number, and facilitate the identication of units in large
systems.
• global brightness enables you to adjust the touchscreen and LED
brightness of all the components in your system by changing the brightness
ofasingletouchscreen.AllCAN-Bussoftwareupdatesautomaticallyset
the updated unit to global brightness. If you want a particular unit to be
excluded from global brightness, deselect global brightness for that unit.
• global standby enables you to bring your entire system in and out of
standby by pressing the standby button of any unit or remote. All
CAN-Bussoftwareupdatesautomaticallysettheupdatedunittoglobal
standby. If you want a particular unit to be excluded from global standby,
deselect global standby for that unit.
operate e operate settings allow you to bring the target unit in and out of standby, or
mute. is key will be disabled for the unit whose touchscreen you are using to
accessCAN-Bus.
AC status e AC status screendisplaysinformationfromthetargetunit’selectricalsupply
sensors.Twoscreensareavailable,withthesecondaccessedbyselectingmore.
status e status screen is the simplest way to access essential information about
thetargetunit.Itdisplaysthetargetunit’smodelnumber,softwareversion,
operational status and serial number.
CAN-Bus model
specific features
efollowingCAN-Busfeaturesaremodelspecic.
PlayLink
is feature is exclusive to Delta series disc players and will only function if
thediscplayerisconnectedtoaCAN-Busenabledpreamporsurroundsound
processor.
When PlayLink is active, pressing play on the disc player will also automatically
switch the preamp/processor to a specied input. is means that you can listen
to a CD or watch a DVD literally at the touch of a button.
e rst step in using PlayLink is to choose the input you wish to be selected
when play is pressed on the disc player. Press the PlayLink icon, then select the
correct input from the list.
Once you have selected the input press back, then select conguration.
PlayLinkisactivatedanddisabledthroughthePlayLinkiconontheCAN-Bus
conguration screen.