Owner`s manual

36
CAN-Bus Classé’sControllerAreaNetwork,orCAN-Bus,opensthewaytoanew
levelofinteractionbetweenourCAN-Bus-equippedampliers,preamps,
processorsandsourcecomponents.WhentheCP-800isconnectedwithCAN-
Bus,thedierentelementsofaCAN-Bus-connectedsystemareinconstant
communication, creating a “global” network that delivers system wide status
information and shared operational features, all through the touchscreen display.
features CAN-Buswillallowasingletouchscreento:
• Displaystatusinformationforeveryconnectedunit,includingampliers
which do not have a touchscreen display.
• Createa“PlayLink”thatallowsaCP-800oranSSPtoautomatically
switch to the correct input when a Delta series source component starts
playback.
• Adjusttheglobalsystembrightness.
• Conguretheentiresystemtogoinandoutofstandbyatthetouchofa
button and also bring individual components in and out of standby.
• Muteanyconnectedunit.
hardware setup 1 Classé Delta Series Products
TwoormoreClasséDeltaand/orCTseriesproductsarerequired,atleastone
of which must have a touchscreen display.
2 Category 5 Network Cables
ese are ordinary network cables, commonly used for broadband Internet
connections. ey should be typical “straight through” cables not the “crossed
over” type, and the total required will be one less than the total number of
Deltaand/orCTseriescomponentsinyoursystem.