Owner`s manual

34
DC Triggers e CP-800 has two available trigger controls. Each may be programmed using
normal 12 V or “inverse logic” (0 V) settings. e ability to change the way the
trigger operates can solve installation-specic problems that otherwise require
external devices that add to both the cost and complexity of your system.
e triggers can be associated with the Standby mode, a specic source or a
conguration.TousetheInverseLogicoption,simplychecktheInverseLogic
boxontheTriggerSetuppage.
For more information on the potential use of DC triggers, we recommend you
speak with your authorized Classé dealer.
Tone Control SettinguptheToneControlinvolveschoosinghighandlowfrequencyinection
points, and relative cut or boost for them. e factory default settings create
what is sometimes called a tilt control, which tilts the tonal balance either
toward more high and less low frequency for a leaner, crisper sound, or the
opposite direction toward a warmer, fuller sound.
NOTE: To change these parameters, press MENU, then System
Setup, Tone Control Setup.
If conventional bass and treble controls are preferred they may be congured
usingtheToneControlSetuppageasdescribedintheMenuSystemsection.
PressToneontheremoteorMENUthenToneControlonthetouchscreento
accessthetonecontrol.eToneControlisactivatedbyselectingtheEnable
boxonthetouchscreen.Alternatively,pressingToneontheremotecontrol
whenontheToneControlscreentogglesthecontrolonando.Whenthe
ToneControlisenabled,ToneappearsinaboxontheHomepage.eVolume
up/down buttons on the remote and the volume knob on the unit are used
to increase or decrease the eect of the tone control when in tilt mode. When
used as conventional bass and treble controls, the Boost and Cut buttons on the
touchscreen are used for increasing or decreasing the corresponding tone control
levels.esecontrolsmayalsobeaccessedbypressingToneontheremote
control and using the navigation keys. e adjustment range is +/- 6 dB in 0.5
dB increments.