Owner`s manual
32
Tone Control Setup e tone control may be congured as conventional bass and treble controls
or used as what is sometimes called a tilt control. In either conguration the
maximum boost and cut is 6.0 dB.
e default setting congures the tone controls as a tilt control with low- and
high-frequency inection points at 200 Hz and 2000 Hz respectively. ese
values are user adjustable, allowing customization of the frequency ranges
manipulated by the tilt control.
WhenontheToneControlscreen,pressingthevolumeupbuttononthe
remote or rotating the volume knob clockwise will tilt the control up in the high
frequencies and down in the low frequencies, stepping in 0.5 dB increments.
Pressing the volume down button or rotating the volume knob counterclockwise
reverses the eect, increasing low frequencies while decreasing the highs. In
general, this allows for subtle shifting of the tonal balance toward a more lean or
warm sound respectively.
If conventional bass and treble controls are desired, select that option and
choose the frequencies below which the bass control works and above which
the treble control works. e bass and treble controls may be accessed from
thetouchscreen(Menu,ToneControl)orbypressingToneontheremote.Use
the navigation buttons on the remote or the touchscreen buttons to increase or
decreasethelevelofbassandtrebleindependently.eToneControlisactivated
anddeactivatedbysuccessivepressingoftheTonebuttonontheremoteor
selecting and deselecting the Enable box on the touchscreen.
Teach IR e complete list of CP-800 discrete infrared (IR) command codes extends
beyond what is practical for any one handheld remote control. However, many
of these functions are critical if you plan to create a customized remote control
with macros that take command of your entire system. Without these discrete
codes,manyofthemacrosyoumightwanttocreatesimplywon’tworkreliably.
eTeachIRpagedisplaysascrollinglistofalltheavailableIRcodesinthe
CP-800. Simply scroll to the command you want your macro-capable remote to
learn and touch the Send IR Code button. e CP-800 continuously sends that
command code via the front panel - as long as the button is pressed – until your
third-party remote control has learned it.
For more information on control systems, we recommend you speak with your
authorized Classé dealer.