Owner`s manual
31
Mute Setup e Mute Setup page allows you to choose how the Mute button functions. e
options for mute control are:
• specic - allows you to select the exact value to which the volume is
attenuated. If the current volume is already below that level when muting
is engaged, the volume remains unchanged. e factory default is - - -,
which is fully muted.
• dampening - reduces the current listening level by a specied amount (like
-25.0 dB).
EQ Setup e CP-800 Parametric EQ capability allows you to build very precise digital
audio lters to help compensate for xed sonic irregularities dened by the
location and characteristics of your speakers, your room and your listening
position in the room. ese lters should be constructed based upon audio
measurements made by a well-qualied acoustical engineer. ese powerful
lters are made available in a completely manual fashion to help your
professional installer give you the best listening experience possible.
As many as ve lters can be built for each speaker channel. An Aux channel
not being used as a subwoofer assumes the same lters as dened for its Left or
Right channel partner.
In order to dene the PEQ lters, select EQ Setup from the System Setup
menu Check the box to enable the EQ. Choose which channel you wish to
adjust, select a band and enable its lter, then tune it with the appropriate center
frequency, gain, and Q.
You do not need to have all or even any lters enabled for every channel. e
installer need only make the adjustments to the channels necessary to correct
fortheroom’sinteraction.We encourage you to consult with your authorized Classé
dealer to properly calibrate the Parametric EQ function.
NOTE: that a discrete IR command or Fkey may be used to toggle
the EQ on and o to easily compare before and after from the
listening position. When the EQ is enabled, EQ appears on the
Home page.