Owner`s manual

 e player is designed to respond to IR commands of 5VDC, with the tip

of the mono mini-jacks deﬁ ned to be “positive” relative to the shank of the

plug.

6 DC Trigger Input and Output

Many audio/video components can supply a DC control voltage to

associated equipment in order to induce desired behavior. Your Classé

player can take advantage of these capabilities in order to be switched

between operate and standby automatically, usually in concert with the A/V

preamp itself.

 e

⁄8

-inch mono mini-jack Trigger In provides for remote-controlled

turn-on (that is, toggling between operate and standby) of the player.

Two

⁄8

-inch mono mini-jacks provide individually controllable DC

trigger outputs which can be used for any of a number of purposes, as

described in  e Menu System. For example, your dealer can program

Trigger Out to toggle your Classé power ampliﬁ er between operate and

standby with your CDP-300.

 e remote Trigger In will respond to the presence of 5–12VDC, with tip

polarity as shown below:

Similarly, the Trigger Outs will create a 12VDC signal that can support up

to 100mA of current.

7 Classé CAN-Bus Control Ports

 ese RJ-45 connectors are reserved for future control and communication

applications using Classé Audio’s implementation of the Controller Area

Network (CAN) Bus speciﬁ cation.

8 RS-232 Control Port

 is port has two purposes:

• downloading new operating software into your player (should

new features ever be added, for example)

• external control of your preampliﬁ er by systems such as

i-Command

™

, AMX

and Crestron

™

For more information, please contact your dealer and ask about home

automation systems.

Downloaded From Disc-Player.com Classe Audio Manuals