User`s guide

APOGEE ELECTRONICS

Mini-DAC – User’s Guide

APOGEE ELECTRONICS

Mini-DAC – User’s Guide

Features & Specications

• Inputs include AES (single & double wide), Optical (ADAT, S/MUX & S/PDIF) coax, & USB

• Analog Output level control for direct connection of powered monitors

• Low-current, low-voltage -ideal for location/ENG

• Digital thru mode adds USB functionality to any digital device including Apogeeʼs Mini-Me, Trak2 and Rosetta

Inputs:

• 2 x AES-EBU on 9 pin D-Type (breakout cable to two female

XLR-3 required) handling sample rates: 44.1k-192k single-wide

and 88.2 k–192k double-wide.

• S/PDIF optical on TOS-LINK 44.1/48k

• S/PDIF coaxial on RCA 44/1-192k

• ADAT 44/1-48k

• ADAT/SMUX II for 88/2/96k

• ADAT/SMUX IV for 176.4/192k

• USB at 44.1/48k

Outputs:

• 2 x XLR (pin 2 – hot) for pro-audio stereo

• 1/8” jack for consumer-level stereo (standard 1/8” to RCA

cable required) also able to drive headphoneʼs

• 1/4” jack headphone

• USB

Specs:

• Output level xlrʼs: 24dBu max (internally or externally adjustable) ultra

low impedance, high current drive balanced outputs.

• Output 1/8”: +7dBV max (xed or externally adjustable)

• Headphone out: 300mW into 30 ohm

• Sample rates: 44.1/48-88.2/96-176/192 . All +/- 10%

• Max word length: 24bit

• Frequency response: 10-20k +/- 0.2 dB (at 44.1kHz)

• THD+N: -104 dB

• Dynamic range: 119 dB weighted

• Inter channel crosstalk: -125 dB

• Power consumption: 6.5W max.

• Power source: 6-14 V DC. International (90-240V) power adapter included

Due to on-going development Apogee reserves the right to change all information and specications without notice.