Owner`s manual

ManualsBrandsClasse Audio ManualsComputer equipmentDAC-1

1.3 REAR PANEL

View page at the front for Rear Panel Inputs

and Outputs

1.3.1 INPUT CONNECTIONS

1.3.1.1 ANALOG AUDIO INPUTS

a) VID1 (Line level, single ended: RCA x 2)

b) VID2 (Line level, single ended: RCA x 2)

c) VID3 (Line level, single ended: RCA x 2)

e) VID4 (Line level, single ended: RCA x 2)

f) VID5 (Line level, single ended: RCA x 2)

g) VID6 (Line level, single ended: RCA x 2) (TAPE

MONITOR, FROM VCR OR OTHER A/V RECORDER)

h) AUDIO 1 (Line level, single ended: RCA x 2)

I) AUDIO 2 (Line level, single ended: RCA x 2)

j) AUDIO 3 (Line level, single ended: RCA x 2)

k) AUDIO 4 (Line level, single ended: RCA x 2)

l) AUDIO 5 (Line level, single ended: RCA x 2)

m) AUDIO 6 (Line level, balanced: XLR x 2)

(PIN 2 = HOT)

These analog audio inputs accept a line level

signal from any component equipped with the

appropriate output circuitry. Except for ‘m)

AUDIO 6,’ all analog audio inputs are single ended

circuits with RCA-style terminations. AUDIO 6, the

balanced input, requires three-pin XLR connectors

(Pin 2 = Hot),. The SSP-75 has no internal

provisions for MM or MC phono amplification/RIAA

equalization but accepts line level outputs from a

wide variety of external step-up devices if desired.

Please Note that g) VID6 is an analog TAPE

MONITOR input designed to be connected to the

analog OUTPUT of a VCR or other Audio/Video

recorder. This input would be used with the VID6

RECORD OUTPUT beside it. The VID6 RECORD

OUTPUT should be connected to the analog

audio INPUT of a VCR or other A/V recorder.

1.3.1.2 5.1 ANALOG AUDIO INPUTS

a) MAIN Left and Right (Line level, single ended:

RCA x 2)

b) SURROUND Left and Right (Line level, single

ended: RCA x 2)

c) CENTER (Line level, single ended: RCA x 1)

d) SUB (Line level, single ended: RCA x 1)

Some of the new DVD players have 5.1 analog

outputs which you may prefer to use. In addition,

these analog inputs allow you to use any new

audio format which requires 5.1 channel inputs.

1.3.1.3 DIGITAL AUDIO INPUTS

a) COAX1 (multi-format S/PDIF: RCA x 1)

b) COAX2 (multi-format S/PDIF: RCA x 1)

c) COAX3 (multi-format S/PDIF: RCA x 1)

d) COAX4 (multi-format S/PDIF: RCA x 1)

e) OPTICAL1 (multi-format S/PDIF: Toslink x 1)

f) OPTICAL2 (Multi-format S/PDIF: Toslink x 1)

g) AES/EBU (multi-format S/PDIF: XLR x 1)

b) AC3 (Multi-pin connector for external

demodulator - 1) TO PLAY AC3 ENCODED LASER

DISKS ONLY

The COAX1 through 4 digital audio inputs accept

standard S/PDIF digital signals via 75 ohm coaxial

cables with RCA-style connectors. The OPTICAL1

and 2 inputs use a Toslink-style optical connector

for digital source components with TOSlink digital

output. AES/EBU is designed to be used with the

Balanced style, 3 pin, high end digital outputs,

including our CD players and DACs. The AC3

connector is requires a separate outboard RF

demodulator, and is required only if you will be

playing Laser Discs with an AC3 audio format.

1.3.1.4 VIDEO INPUTS

a) VID1 (Composite: RCA x 1 and separate S-Video:

mini-DIN x 1)

b) VID2 (Composite: RCA x 1 and separate S-Video:

mini-DIN x 1)

c) VID3 (Composite: RCA x 1 and separate S-Video:

mini-DIN x 1)

d) VID4 (Composite: RCA x 1 and separate S-Video:

mini-DIN x 1)

e) VID5 (Composite: RCA x 1 and separate S-Video:

mini-DIN x 1)

f) VID6 (Composite: RCA x 1 and separate S-Video:

mini-DIN x 1)(TAPE MONITOR: from VCR or

other A/V)

g) INPUT1 (Component video: RCA x 3)

h) INPUT2 (Component video: RCA x 3)

These inputs accept video signals from various

video source components. Inputs a) through f)

accept a composite video signal and S-Video (Y/C)

signals, depending on the input used. Inputs g)

and h) accept only Component Video.

• Any S-Video input will appear at both the

S-Video outputs and at the Composite Video

outputs. Composite Video input will only appear

at the Composite Video outputs.

• Any Component Video input will only appear

properly at the Component Video output,

though a picture will appear in Black and White

at the S-Video outputs.

Please Note that f) VID6 is a video TAPE MONITOR

input designed to be connected to the composite

or S-Video OUTPUT of a VCR or other Audio/Video

recorder. This input would be used with the VID6

RECORD OUTPUT beside it. The VID6 RECORD

OUTPUT should be connected to the Composite

or S-Video INPUT of a VCR or other A/V recorder.

1.3.2 OUTPUT CONNECTIONS

1.3.2.1 MAIN AUDIO OUTPUTS

(Preamplifier outputs)

a) Multi-channel (L, C, R, LS, RS, & SUB,

Unbalanced: RCA x 6). Analog.

b) Multi-channel (L, C, R, LS, RS, & SUB,

BALANCED, XLR x 6)(PIN 2 = HOT). Analog.

NC3MAH

NC3FAH2

PUSH

NC3FAH2

PUSH

NC3MAH

AUDIO/VIDEO INPUTS

VID1 VID3VID2

VID4 VID6VID5

S-VIDEO INPUTS

COMPOSITE VIDEO INPUTS

OUTPUTS AUDIO INPUTS

RECORD

VID6

AUDIO 1

ZONE2

RECORD

VID6

OSD

MONITORZONE2

VID

AUDIO 2 AUDIO 4AUDIO 3

NO OSD

MONITOR

COAX1

S-VIDEO OUTPUTS

COMPOSITE VIDEO OUTPUTS

SUB

VID2 VID3VID1

VID5 VID6VID4

FRONT SURROUND

RIGHT

CENTER

RECORD

OSD

MONITORVID6

NO OSD

MONITOR

MAIN OUTPUTS

LEFT REAR LEFTRIGHTFRONT

5.1 ANALOG INPUTS

AUDIO 5 FRONT

COAX2 COAX4COAX3

SUB

RECORD

OUT

CENTER

OPTICAL2OPTICAL1

COMPONENT VIDEO

SURROUND

DIGITAL INPUTS

AUDIO INPUTS

RIGHT AUDIO 6

AC-3

COAX

ADAPTOR

LEFT

OPTICAL

OUTPUTS

LEFT

RIGHT

AES/EBU

INPUT1

Cb Cr Y

INPUT2

Cb Cr Y

CENTER SUB

Cb Cr

RS 232 PORT

EXTERNAL CONTROL

MONITOR

RIGHT

LEFT

MIC

A.C. INLET

MAIN

ZONE

IR DC IRDC

BEFORE CONNECTING TO A.C. LINE

ALWAYS TURN OFF UNIT BEFORE

DISCONNECT A.C. LINE BEFORE OPENING UNIT

CHANGING ANY CONNECTIONS

REPLACE FUSE WITH SAME TYPE AND RATING ONLY

CHECK OPERATING VOLTAGE

W A R N I N G