Owner`s manual

1.2.12 TRIM
Allows you to temporarily individually adjust up
or down the volume of the Subwoofer, the Center
speaker and the Surround channels. Utilizing the
> or the < buttons (to the right and left of the
Enter key) you can scroll through the available
speakers and increase or decrease the level of the
output by +16 to -16 dB. Pressing TRIM a second
time memorizes the new value and turns off the
setup. The setup will also memorize and turn off
setup five seconds after last pressing a button.
The trimmed settings are lost and settings returned
to 0 dB when the SSP-75 goes into standby or
AC supply is lost.
NOTE: Program content will continue to play (you
will be able to hear the effect of your trim settings
while changing them), and volume and mute
remote functions continue to work while trim
is accessed.
1.2.13 /\
Utilized during the setup procedures, but inactive
at other times.
1.2.14 MENU
Utilized during the setup procedures. Accesses a
series of setup screens. The screen for the next
setup level appears each time you press the button.
1.2.15 <
Utilized during the setup procedures, and when not
in setup also can be used to search the SOURCE
inputs for the next ‘live’ input.
1.2.16 ENTER
Used during setup to select the preferred entry
1.2.17 >
Utilized during the setup procedures, and when not
in setup also can be used to search the SOURCE
inputs for the next ‘live’ input.
1.2.18 \/
Utilized during the setup procedures, but inactive at
other times.
1.2.19 DIRECT ACCESS KEYS
AV1 through AUD6. Each key directly accesses a
SOURCE. SOURCEs may be assigned a label.
1.2.20 ZONE
While in the Main area, pressing the Zone button
activates control of the remote Zone. If the remote
zone is off, ‘ZONE OFF’ appears in the window for
a few seconds. Pressing the ‘STANDBY’ button after
pressing ZONE will turn the remote zone on or off.
While controlling the remote Zone pressing the
STANDBY, VOLUME _ and VOLUME _ buttons, the
Direct Access keys and MUTE controls the SOURCE
fed to the Zone Audio and Video output jacks.
If you press the ZONE button a second time,
controls revert to main zone operation, or ten
seconds after making your adjustments to the
remote Zone, the SSP-75 reverts to Main area
operation. There is no need to press the ZONE
button when controlling the remote Zone via an
infrared repeater connected to the Zone IR. To
control the main zone from the remote zone
infrared control input press the Zone button first.
1.2.21 MUTE
Mutes the output. Pressing again returns the
volume to the previous level. After muting you may
turn down the level without unmuting, but turning
up the volume unmutes the output.
1.2.22 VOLUME \/
Affects Master Level settings in a manner identical
to turning the front panel Master Level Control
counterclockwise. Pressing the button and releasing
it causes the volume to decrease in a 1 dB step.
Holding the button down will, after a brief pause
after a 1 dB decrease, cause the volume to
continuously decrease in 1 dB steps until the
button is released. –80 dB is the minimum level.
1.2.23 VOLUME /\
Affects Master Level settings in a manner similar to
turning the front panel Master Level Control
clockwise. Pressing the button and releasing it
causes the volume to increase in a 1 dB step.
Holding the button down will, after a brief pause
after a 1 dB increase, cause the volume to
continuously increase in 1 dB steps until the button
is released. +30 dB is the maximum level.
7