Technical data

April 3, 2012
8
Connections
Overview
Power Connector
Supplied power must be 12 V DC nominal at 500mA (between 8V
and 27V DC, 24V DC nominal may require an additional adapter).
This power socket mates with a PP-012 connector (DigiKey part#
CP-012-ND, Radio Shack Adaptaplug Tip „A“ 273-334). VDC(+) is
on the inside, GND outside. A minimum of 12V is needed to charge
the batteries (Radio Shack AC-DC Power Adapter 273-357)
Ensure any external power source is only connected
in case no or only rechargeable batteries are in the
device. External power might damage non-
rechargeable batteries (risk of leakage).
Power and Data Port Connector (IGC standard)
The 8-pin RJ45-socket accepts and retains an 8-pin connector.
Except for pin #3, the pin-out is in accordance with IGC GNSS FR