Technical data

April 3, 2012
32
which may be incurred by FLARM Technology GmbH with respect
to any product from FLARM Technology GmbH.
In addition, FLARM Technology GmbH's current General Terms
and Conditions of Sale apply.
FLARM Technology GmbH makes no warranties based on the
accuracy or completeness of the contents of this document and
reserves the right to make changes to specifications and product
descriptions at any time without notice.
Conformity Declaration
FLARM Technology GmbH, Lindenstrasse 4,
CH-6340 Baar, Switzerland, declares that the
product PowerFLARM Collision Warning
Device in Hardware Version FLAPFP2*E and
typical configuration, meets the requirements
of the CE mark.
The communications conformity meets the
requirements of EN 300 220 (power class 9),
EMC- Conformity EN 301 489 (class 3 SRD-
Device, equipment type I). The device is in
accord with the requirements of the
European R&TTE Directive.
This device complies with Part 15 of the FCC.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Within the USA, the device may only be used
in transportation vehicles such as aircraft or
motor vehicles.
This Class A digital apparatus complies with
Canadian ICES-003.
FCC ID:
ZKUGC625161
IC ID Number:
10154A-FLAPFP24