Technical data

PowerFLARM Device Manual for FW v2.00
21
Start-Up
To switch on the device, the operating button must be pressed for
at least three seconds.
A start-up display then appears.
If the disclaimer screen is not acknowledged
by pressing the button within 5 minutes, the
device switches off automatically to conserve
battery.
After acknowledging the disclaimer, the
displays how many GPS satellites have been
found. As soon as GPS reception is sufficient to
give a worthwhile determination of position,
the device then switches to normal operation.
Fault Reporting and other Information
During normal operation the display advises the user on
operational conditions. In addition, the device has a self-test
function. Should it detect a fault, the device will display a fault
report. Several types of reports might be displayed:
Serious Fault: Operation may not continue.
Caution / Fault: A fault has occurred and/or
extra care is required.
Information: Simple information report, no
fault.