Owner`s manual

The

Standby LED

will —ash to indicate the condition.

warm up/break-in period

Your new Classé disc player will deliver outstanding performance immediately.

However, you should expect to hear it improve somewhat as it reaches its

normal operating temperatures and its various components ≈break-in.∆ It has

been our experience that the greatest changes occur within the –rst 300 hours,

as the player reaches thermal equilibrium and the capacitors fully form. After

this initial break-in period, the performance of your new product should remain

quite consistent for years to come.

The only exception to this rule is if the unit is placed in standby or unplugged

for an extended period of time, allowing it to cool down. Depending on the

degree of cooling involved, you should expect a brief warm-up period before the

its sound quality is at its best. Unless your player was allowed to become quite

chilled, subsequent thermal re-stabilization should not take long. Fortunately,

you should never have to repeat the initial 300 hour break-in period.

please read this manual…

Please take a few minutes to review this manual, and to familiarize yourself with

your new player. We understand that you are anxious to plug everything in and

get started. However, reading this manual and following the advice it gives will

ensure that you get all the bene–ts you deserve from having purchased such a

–ne piece of equipment.

ENGLISH