User`s guide

186

Toshiba Utilities

Toshiba SD™ Memory Boot Utility

5.375 x 8.375 ver 2.3

Toshiba SD™ Memory Boot Utility

In order to boot from an SD card, you must make the SD card

bootable. To do so, run the Toshiba SD Memory Boot Utility.

1 Attach a USB floppy drive to your computer, and insert a

bootable floppy disk.

2 Insert the SD card into the SD card slot.

Be sure to back up your data before performing this procedure

as data on the drive may be lost.

3 Click Start, All Programs, Toshiba, Utilities, and then

SD Memory Boot Utility.

The Toshiba SD Memory Boot Utility screen appears.

Sample Toshiba SD Memory Boot Utility screen

4 Select the drive where the SD card slot is located.

5 Select Read from a floppy disk.

To create a bootable SD card with the “Read from an image

file” option requires a third-party application.

6 Click Start.

NOTE