Instruction Manual

Intelli-Tank Manual (106759)092204 – 3 – Class 1
When the unit is first powered up the LEDs will cycle on individually starting with the
bottom LED (LED 1) and then the LEDs will show current status.
• A Master unit properly connected to a functioning transducer will display current
tank level information.
• A Master unit not connected to a pressure transducer will alternately flash the
bottom two LEDs.
• A Remote unit connected to a Master unit (through the 1-wire data line) will
mimic the Master unit’s LED condition and flash rate.
• A Remote unit not connected to a Master unit will alternately flash the upper two
LEDs and the lower two LEDs. This indicates a “no data” condition.
Level indications: