Owner manual

To enter the OEM Menu, the engine must be at less than 900 RPM

Press the switches in this sequence.

SELECT : SILENCE : SELECT : SELECT : MENU

Scroll through menu items by pressing the MENU switch.

Select items from the menu by pressing the

SELECT switch.

After Selection, change items by pressing the SELECT switch.

Save information and exit from the menu by pressing the

SILENCE switch unless noted.

* You must save any changed item before moving on in the menu!

MENU CLR HRS SELECT clk: PTO PTO Clock

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

SELECT clk: USER User Clock

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU SVC TIME SELECT Time Interval digits displayed on Engine RPM

Change hours by depressing the SELECT switch

Direction changes each time the key is pressed.

press SILENCE to update service interval (0-9999 hrs)

MENU LV-ALM: (Y / N) SELECT enable or disable the low voltage alarm

MENU AUX INP SELECT -AUX- IN-

configure message for this input that will be displayed when it is active.

SELECT selects character to change, indicated by flashing cursor.

SILENCE scroll letters (A-Z blank a-z 0-9)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU ALARM: (Y / N) SELECT enable or disable the aux input alarm

MENU AUX HRS SELECT -AUX- HR-

configure message for this input that will be displayed when it is active.

SELECT selects character to change, indicated by flashing cursor.

SILENCE scroll letters (A-Z blank a-z 0-9)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU CHG LOGO SELECT -CLASS1-

configure message that will be displayed in the Message Center.

SELECT selects character to change, indicated by flashing cursor.

SILENCE scroll letters (A-Z blank a-z 0-9)

Press the select switch first and then the silence switch, hold both for 1 second and

then release select first and then silence to save data

MENU DEFAULTS SELECT returns ESC to default configuration.

OEM MENU

PAGE 1
OEM MENU To enter the OEM Menu, the engine must be at less than 900 RPM Press the switches in this sequence. SELECT : SILENCE : SELECT : SELECT : MENU Scroll through menu items by pressing the MENU switch. Select items from the menu by pressing the SELECT switch. After Selection, change items by pressing the SELECT switch. Save information and exit from the menu by pressing the SILENCE switch unless noted.
PAGE 2
SERVICE MENU To enter the Service Menu, engine RPM can not be greater than 900. Press the switches in this sequence. SILENCE : SELECT : SILENCE : SILENCE : MENU Scroll through menu items by pressing the MENU switch. Select items from the menu by pressing the SELECT switch. After Selection, change items by pressing the SELECT switch. Save information and exit from the menu by pressing the SILENCE switch unless noted.
PAGE 3
USER MENU To enter the User Menu, engine RPM can not be greater than 900. Press the MENU switch. Scroll through menu items by pressing the MENU switch. Select items from the menu by pressing the SELECT switch. After Selection, change items by pressing the SELECT switch. Save information and exit from the menu by pressing the SILENCE switch. User Menu MENU TEST LTS SELECT All display segments & LED’s illuminate, alarm sounds.