Engineering Standards Name Engineering Standard Number ENFO III Identifier C1-103817 Installation Information ENGINE RPM OIL PRESS ENGLISH (PSI - o F) VOLTS TEMP o METRIC (kPa - C) ENFO III page 1 of 4 pages
Engineering Standards Name Engineering Standard Number ENFO III Identifier C1-103817 Installation Information ‘s ENFO III provides the pump operator with electrical system and engine operating information in a single unit that includes an alarm. þ þ þ þ þ Engine RPM Display System Voltage Display and Alarm Engine Oil Pressure Display and Alarm Engine Temperature Display and Alarm (Oil or Coolant ) English Display 4.437 ENGINE RPM OIL PRESS 6.
Engineering Standards Name Engineering Standard Number ENFO III Identifier C1-103817 Installation Information Installation The display mounts in a 3.62” by 5.2” cutout. Overall area necessary for installation is 4.5” by 6.0”. Four 0.201d holes are provided for mounting screws. 3.687 5.250 MOUNTING HOLES AND 5.180 CUT-OUT DIMENSIONS Ø 0.201" 3.
Engineering Standards Name Engineering Standard Number ENFO III Identifier C1-103817 Installation Information ENFOIII harness connection to the apparatus is achieved by the use of a Deutsch four (4) pin socket connector.
