Owner's manual

FORM-ENG-0018 REV A 05-27-03
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : [phone] or 1-800-520-3473
TECHNICAL DATA SHEET
PAGE
33 OF 36
DATE
6/19/2014
PRODUCT GROUP
THROTTLE CONTROL
P/N 3045-101-00-CL1, 3045-102-00-CL1 REV
1.02
PRODUCT
SENTRY PRESSURE GOVERNOR
BY AMS
9. Connector Description
9.1. SENTRY connectors
The module has four connectors and the following definitions apply:
Mating connector: Deutsch DT06-6SA GRAY
Mating sockets: Deutsch 0462-201-16141
Gold mating sockets: Deutsch 0462-201-1631
Wedge lock: W6S Recommended wire gage: 16-20 AWG
PIN
CIRCUIT
DESCRIPTION
1
Sensor SIGNAL
(
INPUT
) – Intake pressure signal
(+0.5VDC to +4.5VDC)
2 Sensor SIGNAL (INPUT) – Discharge pressure signal (+0.5VDC to +4.5VDC)
3
Sensor +5 REF
(OUTPUT) – Intake pressure supply
(+5VDC)
4
PUMP INTLK
(
INPUT
) – pump engaged interlock
(positive polarity)
5 Throttle EN (OUTPUT) – remote throttle activate (ground polarity)
6
Sensor gnd REF
(OUTPUT) – Intake pressure ground
Mating connector: Deutsch DT06-6SA GRAY
Mating sockets: Deutsch 0462-201-16141
Gold mating sockets: Deutsch 0462-201-1631
Wedge lock: W6S Recommended wire gage: 16-20 AWG
PIN
CIRCUIT
DESCRIPTION
1
ENG REF (+)
(INPUT) – analog signal reference
(+5VDC)
2
THROT INTLK
(
INPUT
) – throttle ready interlock
(positive polarity)
3 HI IDLE (INPUT) – high idle enable (positive polarity)
4
ENG SIGNAL
(OUTPUT) – analog signal control
(+0.5VDC to +4.5VDC)
5
OK2P INTLK
(
INPUT
) – okay to pump interlock
(positive polarity)
6 ENG REF (-) (INPUT) – analog signal reference (ground)
Mating connector: Deutsch DT06-6SA GRAY
Mating sockets: Deutsch 0462-201-16141
Gold mating sockets: Deutsch 0462-201-1631
Wedge lock: W6S Recommended wire gage: 16-20 AWG
PIN
CIRCUIT
DESCRIPTION
1 SUPPLY (+) (INPUT) – battery voltage (+9VDC…+32VDC)
2
CAN HIGH
(DATA) – SAE J1939 CAN 2.0B, 250Kbits/s
3
CAN LOW
(
DATA
) – SAE J1939 CAN 2.0B, 250Kbits/s
4 CAN SHIELD (DATA) – SAE J1939 CAN 2.0B, 250Kbits/s
5
IGNITION (+)
(INPUT) – battery voltage
(+9VDC…+32VDC)
6
SUPPLY (-)
(
INPUT
) – battery ground
Mating connector: Deutsch DT06-6SA GRAY
Mating sockets: Deutsch 0462-201-16141
Gold mating sockets: Deutsch 0462-201-1631
Wedge lock: W6S Recommended wire gage: 16-20 AWG
PIN
CIRCUIT
DESCRIPTION
1
USB +5V
Programming only
2 USB D+ Programming only
3
USB D-
Programming only
4
ALARM (-)
(
OUTPUT
) – alarm active
(ground polarity, 250mA)
5 USB Shield Programming only
6
USB GND
Programming only