Product Info

MORLAB
Shenzhen Morlab Communications Technology Co., Ltd.
FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road,
Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China
Tel: [phone] Fax: [phone]
Http://www.morlab.cn E-mail: [e-mail]
REPORT No.：SZ21070039S02
Page 7 of 53
2.3. Environment of Test Site/Conditions
Normal Temperature (NT): 20-25 °C
Relative Humidity: 30-75 %
Air Pressure:
980-1020 hPa
Test Frequency: WLAN 2.4GHz
WLAN 5GHz
Bluetooth
Operation Mode: Call established
Power Level: WLAN 2.4GHz
WLAN 5GHz
Bluetooth
During SAR test, EUT is in Traffic Mode (Channel Allocated) at Normal Voltage Condition. A
communication link is set up with a System Simulator (SS) by air link, and a call is established.
The EUT shall use its internal transmitter. The antenna(s), battery and accessories shall be those
specified by the Factory. The EUT battery must be fully charged and checked periodically during the
test to ascertain uniform power output. If a wireless link is used, the antenna connected to the output
of the base station simulator shall be placed at least 50 cm away from the handset.
The signal transmitted by the simulator to the antenna feeding point shall be lower than the output
power level of the handset by at least 35 dB.