Owner's manual

THE CONTINUOUS POWER COMPANY

2.2 Specifications

The various specifications of the UPS system are provided in the following tables.

Table 4: ELECTRICAL SPECIFICATIONS

Electrical Specifications

Input Specification

Nominal Input Voltage 120 VAC, Single Phase

Input Voltage Range 85 VAC to 135 VAC

Input Frequency 45 to 65 Hz (+/- 5%)

Input Configuration 3 Wire (Hot, Neutral & Ground)

Input Current (Max. draw) 8.8 amps, Power-Factor Corrected

Input Protection Input breaker 15 amps (20 amps PD1250 (PLUS) &

SP2000)

Output Specification

Nominal Output Voltage 120 VAC, Single Phase

Power Rating 1.25 KVA (1250VA/875W), 2KVA (2000VA/1400W)

Output Voltage Regulation +/- 2% for 100% step load change and from

High battery to Low battery condition

Output Frequency 50 or 60 Hz (+/- .5%) unit not in sync.

Output Configuration 3 Wire (Hot, Neutral & Ground)

Output Wave Form True Sine wave

Overload capability 110% for 10 minutes 200% for 50 milliseconds

2k PLUS 160% for 10 seconds

Fault clearing Current limit and automatic shutdown

Short circuit protection Current limit and automatic shutdown

Efficiency 90% at full load (on utility)

Load Power Factor .7 lagging through unity to .7 leading