Technical data

2
Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]
INTRODUCTION
Thank you for purchasing this CLARKE pump.
Before attempting to operate the pump, it is essential that you read this
manual thoroughly and carefully follow all instructions given. In doing so you
will ensure the safety of yourself and that of others around you, and you can
also look forward to the pump giving you long and satisfactory service.
Upon receipt of the product, any damage or deficiency should be reported
to your CLARKE dealer immediately.
DESCRIPTION
This centrifugal swimming pool pump is designed for the filtration of small to
medium size swimming pools and for pumping clean water only and
operating with contaminated or salt water should be avoided.
When used with permanently installed pools, the pump should be fixed in a
horizontal position and the use of a non-return valve will facilitate immediate
priming. The pump inlet is higher than the impeller inlet so that it can start
operating when only the pump body is filled with water.
The SPPT1 incorporates an integral timer which can be set to operate for a
pre-determined time between 2 and 24 hrs. The timer has a back up battery
to save the settings in case of loss of electrical power, allowing the pump to
start again once power is restored.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of
12 months from the date of purchase. Please keep your receipt as proof of
purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for its intended purpose.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.