Technical data

10
Parts & Service: 020 8988 7400/E-mail:[e-mail] or [e-mail]
THE TIMER BATTERY
The timer is equiped with a re-chargable battery which should re-charge
when the pump is running. Tamper-proof screws are used to secure the top
cover requiring a Y-type screwdriver. If one is not available and the battery
has failed, take the pump to your Clarke dealer.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with general household waste. It should
be disposed of according to the laws governing Waste Electrical and
Electronic Equipment at a recognised disposal facility.
Any redundant accessories and packaging should be sorted and taken to a
recycling centre to be disposed of appropriately.
TECHNICAL DATA
Dimensions (L x W x H): 307 x 142 x 220 mm
Weight: 3.6 kg (8 Lb)
Inlet/Outlet Size: 40 mm
Max Flow: 83 L/min
Max Head: 7 m
Max Water Temperature: 35ºC
Suitable Water Type: Swimming pools/clean water
Power Supply: 220-240V @50 Hz
Sound Pressure Level: 68.6 dB LpA
Sound Power Level: 69.3 dB LwA
Guaranteed Sound Power: 73 dB LwA
Timer Run Times: 2 hour increments - 24 hours
Power Cable Length: 1.8 m
Please note that the details and specifications contained herein, are correct at the
time of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice.