Instruction Manual

4
Parts & Service: 020 8988 7400 / E-mail: [e-mail] or [e-mail]
PRODUCT CARE
CARE & MAINTENANCE
Inspect the helmet regularly to ensure optimum performance. Defects of the
helmet/headgear must result in immediate replacement. If the shell or
headgear show any defects, immediate disposal and replacement of the
product is recommended. Give particular attention to the harness
attachment slots.
Significant impact to the helmet will result in reduced future protection, even if
visual physical deformation is not apparent. In any event, if any cracks are
detected, the helmet must be discarded immediately.
Do not apply tape, paint, solvents, adhesives or adhesive labels to the shell as
such application may reduce the effectiveness of the helmet.
CLEANING
The helmet can be wiped with soapy water or a household cleaning product
when dirty. Clean and/or disinfect all components regularly with a mild
detergent or disinfectant in luke warm water. Apply the cleaner with a clean
cloth or paper towel.
Do not use solvents for cleaning and always dry the helmet away from bright
sunlight or direct heat.
STORAGE
The helment should be transported and stored it its bag in cool, dry conditions
out of direct sunlight.
RECYCLING & THE ENVIRONMENT
If disposing of this product or any damaged components, do not dispose of
with general waste. This product contains re-usable raw materials. ABS plastic
products should be taken to your local civic amenity site for recycling into new
products.