SAFETY HELMET MODEL NO: SHY1(YELLOW) PART NO: 8133824 USER INSTRUCTIONS ORIGINAL INSTRUCTIONS DL0722 REV 1
INTRODUCTION Thank you for purchasing this CLARKE Safety Helmet. Before using this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure your safety and you can look forward to your purchase giving you long and satisfactory service. The SHW1/SHY1 (white/yellow) helmets have been designed to provide head protection to meet the requirements of PPE Regulation (EU) 2016/425 and EN397:2012+A1:2012.
SAFETY PRECAUTIONS The helmet should be checked each day before wearing to ensure that there are no major surface defects such as crazing, cracks, deep scour marks, discolouration or dents to the shell. Never place this product on a hot surface. FITTING AND ADJUSTMENT For adequate protection the helmet must be adjusted to fit the user’s head correctly. The helmet is adjustable for comfort and utility. HEADBAND ADJUSTMENT Horizontal headband adjustment is achieved by turning the adjuster.
PRODUCT CARE CARE & MAINTENANCE Inspect the helmet regularly to ensure optimum performance. Defects of the helmet/headgear must result in immediate replacement. If the shell or headgear show any defects, immediate disposal and replacement of the product is recommended. Give particular attention to the harness attachment slots. Significant impact to the helmet will result in reduced future protection, even if visual physical deformation is not apparent.
COMPONENT PARTS 1 Helmet shell 2 Central headstrap with attachments 3 Diagonal headstrap with attachments 4 Rear adjustable headband 5 Fixed headband with fabric sweatband 6 Chin piece 7 Chin-strap connector 8 Chin-strap elastic 9 Rear headband adjuster 5 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.
DECLARATION OF CONFORMITY - UKCA 6 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.
DECLARATION OF CONFORMITY - CE 7 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.