.5 KW OIL FILLED RADIATOR MODEL NO: OFR7/150 PART NO: 6934001 OPERATION & MAINTENANCE INSTRUCTIONS LS0710
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.
INTRODUCTION Thank you for purchasing this CLARKE 1.5 kW oil filled radiator. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. IMPORTANT Please read all of the safety and operating instructions carefully before using this product.
GENERAL SAFETY RULES 1. Read these instructions carefully in conjunction with the illustrations, before using the oil filled radiator. 14. If the oil filled radiator is tipped over, unplug it and allow it to cool before standing it back up. 2. Before connecting the oil filled radiator, check that the voltage indicated on the rating plate corresponds to the mains voltage in your home / office. 15. DO NOT use the oil filled radiator in rooms with explosive gas (e.g.
ELECTRICAL CONNECTIONS WARNING! Read these electrical safety instructions thoroughly before connecting the product to the mains supply. Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. Connecting it to any other power source may cause damage. This product may be fitted with a non-rewireable plug.
BEFORE USE CONNECTING THE FEET 1. Turn the oil filled radiator upside down and insert the securing loop as shown. 2. Hook the securing loop to the wheel plate and feed the threaded end of the securing loop through the second hole as shown. • The arms on the wheel plate should be pointing outwards. 3. Fix the wheel plate in position with the wing nut supplied. 4. Fit the second wheel plate at the other end of the radiator again with the arms pointing outwards 5.
OPERATION CAUTION: DO NOT OPERATE THE RADIATOR UNLESS IT IS PLACED IN AN UPRIGHT POSITION. • Select an indoor location for the radiator away from electrical cables, drapes and other furnishings. • DO NOT place radiator directly beneath an electrical outlet or against paper board or low density fibreboard. 1. Turn the thermostat to “0” before plugging in the radiator. 2. Plug the radiator into the mains supply.
SAFETY OVERHEAT SHUT OFF Your oil filled radiator is fitted with two safety devices. The first is an anti-tilt switch which turns off the oil filled radiator if it falls over; simply stand the radiator up again to reset this switch. The second is a safety overheat device which switches off the oil filled radiator in the event of overheating caused by any fault condition which induces a rapid temperature rise.
MAINTENANCE CLEANING The oil filled radiator requires regular cleaning to ensure trouble free operation: 1. Do not stand on or drop the heater and treat it carefully at all times. 2. Always turn off and unplug the oil filled radiator from the mains supply and alow it to cool before cleaning. 3. Use a damp cloth to wipe the exterior of the oil filled radiator to remove dust and dirt. 4. Ensure the oil filled radiator is dry before plugging back into the mains supply. 5.
DECLARATION OF CONFORMITY 10 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.
NOTES 11 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.
