Operator`s manual

Page -24- Clarke
®
Operator's Manual -MINI MAX
Squeegee Maintenance
Clean the squeegee with a jet stream of water and a damp
cloth. Inspect the front and rear squeegee blades for wear.
Readjust or replace if necessary.
Front Squeegee Blade Replacement
To replace the front squeegee blade, follow this procedure:
1. Remove the squeegee assembly from the machine.
2. Remove mounting screws and front squeegee
blade.
3. Install new front squeegee blade and reinstall
mounting screws.
4. Replace squeegee on machine.
Rear Squeegee Blade Replacement
If the rear squeegee blade is worn and does not dry the
floor well, follow this procedure:
1. Remove the squeegee assembly from the machine.
2. Push and rotate the small tabs on the squeegee so
that they will slip through the holes in the squeegee
blade clamping plate (see figure 50).
3. Remove the squeegee blade and inspect it.
4. Rotate the squeegee blade to obtain a new
cleaning edge. Replace if necessary.
5. Reinstall the squeegee blade.
6. Reinstall the squeegee assembly on the machine.
7. Readjust the settings on the squeegee as required
(see “How to Adjust Squeegee”).
Figure 50
Maintenance (cont.)