User guide

11
FITTING THE SUPPORT TABLE
There are 3 positions available for the support table to accomodate different
log lengths.
1. Insert the support table arms into
both side brackets.
2. Insert the star knob to lock the
support table into position.
• The star knob can be fitted on
eith
er side of the bracket.
MOVING THE LOG SPLITTER
To move the log splitter to the work
site.
1. Make sure the oil tank cover / air
bleeder is fully tightened.
2. Grasp handle (A) and tilt the log
splitter towar
ds you slightly.
Never try to lift the log splitter by
handle (A).
CAUTION: BEFORE MOVING THE LOG SPLITTER, MAKE SURE THE OIL TANK
COVER / AIR BLEEDER IS FULLY TIGHTENED TO AVOID OIL LEAKAGE.