Instruction manual

OPERATION

OPERATING THE LOG BUSTER

This log buster is designed to be operated by one person only and requires

two handed operation by the user -

The left hand controls the hydraulic

control lever and the right hand

controls the push button switch.

1. Push and hold the push button

switch

2. Then press and hold down the

control lever to

start the log

buster.

• The log buster will freeze if

either control is released.

• When both controls are

released, the log pusher returns

to the starting position.

NOTE: Once you start splitting the log, never reach into the splitting zone.

For extremely hard logs, rotate the log by 90° to see whether it can be split in a

different direction. In any case, if you are still not able to split the log, this

means that the wood exceeds the capacity of the machine and should be

discarded to protect the log buster.

WARNING: NEVER FORCE THE LOG BUSTER FOR MORE THAN 5 SECONDS

TO SPLIT EXCESSIVELY HARD WOOD. AFTER THIS TIME, THE OIL UNDER

PRESSURE WILL OVERHEAT AND THE MACHINE COULD BE DAMAGED.