Specifications

8
PREPARATION
CONNECTING THE MULTI HOSE ADAPTOR
WARNING!
DISCONNECTED THE PUMP FROM THE MAINS POWER SUPPLY BEFORE
CONNECTING THE MULTI HOSE ADAPTOR
1 Fit the elbow adaptor to the pump outlet
as shown in the diagram opposite.
2 Screw the multi hose adaptor onto the
elbow,
• The multi hose adaptor is capable of
accepting 1” and 1¼” hoses and a 1”
BSB Thread.
3 Simply cut the multi hose connector to the
required size and attach a suitable hose
using with a worm drive clip.
• For maximum efficiency, we strongly
recommend that you connect a 1¼”
diameter hose to the multi hose
adapter,
• Alternatively, you may remove the multi
adapter altogether, and screw on a 1¼”
BSP hose adapter
The pump is completely submersible, and should be placed in a vertical position, on a
solid flat surface, Placing the pump on a couple of house bricks if required.
SUITABLE HOSES, and SPARE/REPLACEMENT MULTI HOSE ADAPTERS ARE
AVAILABLE FROM YOUR CLARKE DEALER
Elbow
1” Hose
1” BSP
1¼” Hose